Fast shipping Australia-wide
Premium-quality materials
Australian after-sales support
Australia-Wide Setup Support
Promenade XL black honeycomb wood column, EmotionWood
The Promenade XL

· The Promenade XL ·

The honeycomb, scaled up.

A bigger hexagon, a bolder wall.

Fewer joints, more drama.

More than just wood

Born from Estonian forests.

EmotionWood has crafted eco-friendly wood design panels in Estonia since 2014, where nature and design meet in balance. Every panel is made by hand by skilled artisans, guided by Nordic values of quality and responsibility.

Which is why these panels aren't only a surface to look at. They're solid-wood panels that earn their place on the wall: acoustically, environmentally and for years.

Made in Estonia. Defined by quality. EmotionWood · Tallinn

Softer, warmer rooms

Natural wood improves acoustics, thermal comfort and indoor climate, so spaces feel calmer, not just look richer.

Solid, not veneer

Solid timber right through, not a veneer over board, so it can be cut, sanded and lived with.

An original design

A distinctive EmotionWood pattern, handcrafted and made to your order in Estonia: originality you can specify with confidence.

Documented & declared

Eco-friendly production, with technical and installation data sheets: the paperwork trade and architect specs ask for.

Where it lives

A living surface, room by room.

Feature walls & ceilings
01 Feature walls & ceilings Bold honeycomb over large areas.
Columns & Joinery
02 Columns & Joinery Wrap columns and built-ins in hexagon.
Hospitality
03 Hospitality Restaurants, bars, lounges and hotels.

Why it lasts

Solid wood, engineered to be lived with.

The Promenade XL takes the honeycomb hexagon and scales it up — larger tiles, a bolder pattern and fewer joints across big feature walls and ceilings. A 295 × 525 mm panel of solid wood, tiled into one generous hexagonal field.

Promenade XL white honeycomb wood ceiling in a bathroom, EmotionWood

Pattern · Large-format honeycomb

A bigger
hexagon.

The same interlocking honeycomb, scaled up to a larger tile. The pattern reads bolder from across the room and covers big walls and ceilings with fewer joints.

  • Large-format hexagon geometry
  • Bolder pattern, fewer joints
  • 295 × 525 mm panels, tiled seamlessly
Promenade XL thermo abachi honeycomb feature wall, EmotionWood

Material · Solid natural wood

Real wood,
at scale.

Solid timber, never veneer. Thermo finishes are kilned until stable and darker through the body; painted and natural finishes keep their own surface character.

  • Solid timber, never veneer
  • Thermo tones run through the wood
  • Every tile a little different
Promenade XL black honeycomb wood column, EmotionWood

Application · Interiors & sauna

Big walls,
and warm rooms.

Made for large feature walls, columns and ceilings — and sauna and spa interiors in the Thermo Abachi finish, which is built for heat and steam.

  • Large feature walls, columns & ceilings
  • Sauna & spa interiors (Thermo Abachi)
  • Painted & natural finishes for dry spaces

Install · Glue or brad nail

Glue or brad.
Up in a day.

Fix straight to a clean, level wall with a heat- and moisture-resistant silicone, or brad-nail to timber battens. Work row by row so the honeycomb lines up.

  • Adhesive or stainless brad fixing
  • Batten-fix to a flat, level wall
  • Allow 5 to 10% for cuts & waste

Origin · Made in Estonia

Made in Estonia,
by EmotionWood.

Designed and made by EmotionWood in Tallinn, cut to your order and finished to the same standard before it is flat-packed and shipped.

  • An original EmotionWood design
  • Consistent quality, batch to batch
  • Flat-packed, 12 panels per carton

The finishes

One geometry, many characters.

One panel, one pattern; the character comes from the wood. Every finish is solid, hand-finished timber, cut and laid by hand in Estonia.

Thermo Abachi

Warm golden-brown thermo-treated abachi. Stable in heat and steam, sauna-safe, and the signature large-format honeycomb finish.

Thermo Abachi Yakisugi

Thermo abachi charred in the Japanese Yakisugi tradition, a deep, textured char over the large honeycomb. Swatch photo coming soon.

Thermo Abachi Yakisugi Brushed

Charred and brushed thermo abachi, the Yakisugi char with a brushed, tactile grain. Swatch photo coming soon.

Installation

Up on the wall in an afternoon.

Two honest ways to fix the panels: bond straight to a flat wall with adhesive, or brad-nail to battens. No specialist trade required: a clean wall, a level, and a steady row-by-row rhythm.

GLUE THE FIELD stop short of every edge & corner wall panel 15 mm press & level

Best on a flat, dry, load-tested wall. No battens needed; the wall itself is the substrate.

Bonded straight to the wall.

The fastest route for a sound, level wall. A heat- and moisture-resistant silicone holds the panels flush with no visible fixings.

  1. Prep the wallClean, flat and level. Finish all wet works first so the wall is fully dry.
  2. Butter the panelSpread moisture-resistant silicone across the back, covering edges and corners, but stop short of the very edge so it won't squeeze out.
  3. Press & levelSet the panel, press firmly so it beds evenly, and check it sits flush and true.
  4. Work the wallTop to bottom, left to right, row by row, and the seams disappear as you go.
  5. Seal & treatFinish with a breathable wood protector to guard against dirt and moisture.
Panel
295 × 525 mm
Thickness
15 mm
Coverage
0.108 m²
Per pack
12 · ≈1.30 m²
Allow for waste
5 to 10%

The rhythm: row by row.

Whichever way you fix them, start top-left, then work down and across so each row locks into the last.

Start top-left Row by row Down & across

Before you start

  • Acclimatise first. Store the panels in the room for a few weeks so the wood settles to its temperature and humidity. Never below freezing.
  • Wet works first. Finish any wet trades before fitting; panels fixed to a damp wall will absorb moisture and swell.
  • Order a little extra. Allow 5 to 10% for cuts and edge pieces, and expect gentle shade variation between batches.

Care & repair

  • Protect it. Treat all surfaces with a breathable wood protector; it repels dirt and moisture and lifts the grain.
  • Never pressure-wash. Running water or a pressure washer will damage the wood; wipe clean and dry only.
  • Swap a damaged piece. Chisel it out, clean the plywood back, and glue a replacement in; no need to redo the wall.
You'll want Brad nailerCircular sawCaulking gunPencilTape measureSpirit level

Plan your order

How much will you need?

Enter your wall and we'll work out the coverage, panels and packs, with waste allowance already added. A guide only; measure twice before you commit.

m
m
Allow for waste cuts & edge pieces

You'll need

7 packs

12 hand-laid panels per pack, covering ≈ 1.3 m² total

Enter your wall width and height and we'll work out the packs, panels and coverage.12 hand-laid panels per pack, covering ≈ 1.3 m².

Wall area
7.20 m²
With waste
7.92 m²
Panels
84

Indicative total $3,213, from Pricing from $459 AUD per pack. Final price varies by finish.

Lookbook

The panels, in situ.

Finished walls in the wild: kitchens, media walls, saunas and showrooms. Sweep your cursor toward an edge to travel the gallery, or drag it.

Common questions

Answered, before you ask.

A real human is one click away, but most of what we get asked is right here.

Talk to a specialist
How much does one pack cover?

Each pack holds 12 large honeycomb panels and covers about 1.30 m². Panels are 295 × 525 mm. Order by the pack, and allow 5 to 10% extra for cuts and waste.

How is XL different from the Standard Promenade?

It is the same honeycomb hexagon, scaled up to a larger tile. The pattern reads bolder from a distance and covers large walls and ceilings with fewer joints. Standard is the classic, finer honeycomb; XL is made for scale.

Can I use it in a sauna or bathroom?

Yes, in the Thermo Abachi finish, which is thermo-treated for heat and humidity and used in sauna interiors. Painted and natural finishes are for dry interior spaces. For wet areas, complete any wet works first and treat the wood with a breathable protector.

What creates the honeycomb effect?

Solid wood is cut into interlocking hexagon tiles and set in relief, so real light catches each tile and casts soft shadow. It is genuine three-dimensional timber, not a printed or embossed texture.

How do I install the panels?

Two ways: glue straight to a clean, level wall with a heat- and moisture-resistant silicone, or brad-nail to timber battens. Work row by row so the honeycomb lines up.

Do you offer trade or bulk pricing?

Yes. We price by the pack, with trade and architect rates for larger projects. Talk to a specialist for a project quote.

Start planning your wall

Start with the wall.

Tell us about the wall and the look you're after. We'll match the finish, work out coverage and trade pricing, and get it to site.

  • 01 Made to Order Crafted in Estonia, shipped Australia-wide.
  • 02 White-Glove Care Coordinated support from order to handover.
  • 03 Local Support Australian after-sales care when you need it.
Before the download
A short courtesy before the file.

Just your name and email, and your download begins. Your details stay with Sauna Ritual.